Description
AMT Solutions manufactures and distributes air ambulance equipment for all types of fixed wing and rotor wing aircraft. We understand that customers have different requirements and AMT is dedicated to support customers by designing, manufacturing and certifying customized medical interior solutions that exceed expectations.
Whether you need a basic life support system, infant transport, multiple-patient dedicated advanced life support configuration, or custom-built medevac module, AMT Solutions is only a phone call or email away.
- Ten to fifteen minutes to install or remove the Medstar base
- Lightweight aluminum honeycomb base
- The basic Medstar base is only 18,1 kg (40 lb.) which makes it the lightest weight air ambulance base available
- Custom bases with double drawer and storage capacity
- Specific units for installation over rear fold down seats
Base accessories available
Electrical Inverter
- 120 vac and 220 vac
- 330 to 1000 watts
- Two or four electric outlets on the face or end cap of the base
- Simple wiring to the aircraft electric bus
- Convenient, lighted On / Off switch
Oxygen
- Remote port filling
- 3500 to 10000 liters capacity
- Flow meter and high pressure outlets
- Easy to read Oxygen Remaining gauge
Air compressor and vacuum pump
- Pumps are wired for 28 v aircraft power operation. Pumps are independent of inverter operation
- Vacuum pump develops 20 inches (508 mm) Hg of suction at 3.3 amps
- Compressed air pump delivers 19.8 liters per minute at 3.3 amps
- Convenient, lighted On / Off switch
- Medical gas outlet
Drawers
- Up to four standard drawers in a Base
- Locking
Overhead and vertical Patient Care Centers
Flexible LED lighting to assist with patient care
The stretcher and mattress – comfort and stability for the patient
- Stretcher is built from honeycomb and tubular steel
- Mattress is fire blocked, 4” thick, covered in a very durable fabric
- Stretcher locks into the Base the same as car doors close and lock
- Four point upper torso harness and lap and leg belts
- Stretcher is tapered head and foot, no scraping the aircraft door seals and side walls
Other Features
- Medstar bases may be fabricated to meet fixed wing and helicopter requirements
- Honeycomb aluminum has the advantage, versus traditional aluminum bar and aluminum panel construction, of being molded as sheets with rivets and epoxy
- Honeycomb aluminum construction does not have bolts and screws that may cause noise over time
- Honeycomb aluminum has a distinct weight advantage versus aluminum bar and panel – weight savings that every aircraft should take advantage of
- No across the patient cables
- No across the stretcher platform inhibiting stretcher loading and unloading
- Mounting tracks, bars, shelves for equipment available as permanent installation to the aircraft wall or as part of the Medstar Base
Medstar litter base is an Aero Medical Products Mfg. Inc. product and sold by AMT Solutions
- Ten to fifteen minutes to install or remove the Classic litter base
- Steel tube frame; welded for years of noise free service
- Lighter weight than tubular aluminum frames
- The basic Econo base is only 23,1 kg (51 lb.) whith stretcher
Base accessories available
Electrical Inverter
- 120 vac and 220 vac
- 330 to 1000 watts
- Two or four electric outlets on the face or end cap of the base
- Simple wiring to the aircraft electric bus
- Convenient, lighted On / Off switch
Oxygen
- Remote port filling
- 3500 to 10000 liters capacity
- Flow meter and high pressure outlets
- Easy to read Oxygen Remaining gauge
Air compressor and vacuum pump
- Pumps are wired for 28 v aircraft power operation. Pumps are independent of inverter operation
- Vacuum pump develops 20 inches (508 mm) Hg of suction at 3.3 amps
- Compressed air pump delivers 19.8 liters per minute at 3.3 amps
- Convenient, lighted On / Off switch
- Medical gas outlet
Overhead and vertical Patient Care Centers
Flexible LED lighting to assist with patient care
The stretcher and mattress – comfort and stability for the patient
- Stretcher is built from honeycomb and tubular steel
- Mattress is fire blocked, 4” thick, covered in a very durable fabric
- Stretcher locks into the Base the same as car doors close and lock
- Four point upper torso harness and lap and leg belts
- Stretcher is tapered head and foot, no scraping the aircraft door seals and side walls
Other Features
- No across the patient cables
- No across the stretcher platform inhibiting stretcher loading and unloading
- Mounting tracks, bars, shelves for equipment available as permanent installation to the aircraft wall or as part of the Classic litter Base
The Classic litter base is an Aero Medical Products Mfg. Inc. product and sold by AMT Solutions
Don't Be Shy
If we didn’t answer all of your questions, feel free to drop us a line anytime.